Author: Anupum Pant

The Red Rain of Kerala

By Anupum Pant

Visit blogadda.com to discover Indian blogs

In the year 2001, between 25th July and 25th September, people from the Indian state of Kerela (Kottayam and Idukki districts) experienced a bizarre oddity – The Red Rain of Kerala. Sporadic heavy downpours of mysteriously colored water left the people of Kerala dazed. More recently, red rains were also seen in parts of Sri Lanka between 15th November and 27th December, 2012.

Yellow, Black and Green rains have also been reported several times since 1896.

Red Rain of Kerala – Studies

A study conducted in India showed that the rain was colored because these raindrops contained millions of spherical and oval red particles which had an internal structure. These things looked like biological cells. Initially, when scientists weren’t able to confirm the existence of DNA (a fact which has baffled scientists) in them, in spite of an internal structure present in the cells, some started claiming that the origin of these red particles was extraterrestrial, possibly, coming from an exploded meteor.

Later the mystery was solved, the presence of DNA was confirmed and a study, destroying popular media claims, concluded that the red rain of Kerala had been colored due to airborne spores originating from a type of algae. There was nothing alien about it.

The unusual color of the rain was due to the presence of a unicellular micro-organism belonging to Kingdom Protista, of the Phylum Euglenozoa, known as Trachelomonas. Trachelomonas was the main cause of reddish downpours in other regions of the world as well.

[Source: The Red Rain of Kerala]

Why Do Bad Eggs Float?

By Anupum Pant

Visit blogadda.com to discover Indian blogs
Instead of cracking up an egg which has been stored for a long time, to end up disgusted by the ‘rotten egg smell’, or the smell of a gas called Hydrogen Sulfide, a simple and a fairly well known way to check if an egg has gone bad, is to drop it in a glass of water and see if it floats. I found out about this first, from an article written at Frugal Living, and spent some time to confirm its claims – Bad eggs float.
If you take my word for it (you should!), it really does work. The article describes this three-point test to find out if an egg is good to eat.

  1. If the egg sinks and lies on its side, it is a fresh one. It is good enough to be eaten.
  2. If it sinks and stands up on a point, or is at an angle, it is good enough. You can still use it up for making hard-cooked eggs or bake it.
  3. But, if an egg floats, it needs to be discarded.

Why does this happen?

To understand, you’ll have to think of a chick – a young chicken.

Poor Chicks: Before chickens come out of the egg, they develop lungs and need oxygen to breath. Sitting inside a sealed egg, with no cords attached, for the chick to survive, oxygen has to come in from somewhere. For that, let us look inside.

Egg Science: The outer shell of an egg has two membranes under it. When an egg is laid, it is warm and starts cooling which contracts the inner part of the egg more than the shell and pulls the two membranes apart. As a result, air gets trapped in between the membranes (not enough air initially for it to float).

How does the air come in? The shell of an egg isn’t as simple as it looks. It has about 7000 tiny pores in that shell which let the air pass in and let the carbon dioxide pass out of it. This is how the chick breathes. And the reason, eggs boiled in colored water during Easter, get colored from the inside.

So, as there are pores present in the shell, bacteria enter the egg and start decaying the biological matter inside. This produces a smelly gas (and other gases too), Hydrogen Sulfide (also present in smelly farts). The gases from this decomposition, and the air from outside, keep increasing in volume as time passes.

Corollary: This is exactly what explains these floating bad eggs – Greater the amount of gas inside, older is the egg and the better it floats in water.

Side note: Egg shells and the two membranes inside have the ability to stop the invasion of micro-organisms and bacteria, but over time bacteria manage to enter.

Pope John XXI – A Man of God and Science

by Anupum Pant

Pope John XXI was the only pope ever, who had an illustrious medical career alongside his work as a theologian. He was also a fruitful writer, who wrote on subjects like logic, physics, philosophy and medicine. Before being elected as a Pope, he served as personal physician to Pope Gregory.

In medicine, he contributed towards great advances in female reproductive system and wrote about a few remarkably effective methods of birth control, during times when the Catholic Church condemned contraception. He also taught medicine at the University of Siena.

As men with thoughts ahead of their time are always labeled as heretics, John was also called a magician after his death. His death was announced to have been caused by “an act of god”.

The unfortunate accident

His brief papacy [of 8 months, 1276-77] ended with a tragic accident:

As a man of the science, he dabbled in astronomy and had a special room built in the papal palace. He loved spending hours in this special room, where he could observe the stars at night. It was in this room, where he sustained severe injuries, when the roof of his palace collapsed. He died six days later (on May 20, 1277).

Stephen Hawking’s interpretation

In 1277, Pope John XXI’s declared ‘laws of nature’ to be heresy because they conflicted with God’s omnipotence. Several years later, Hawking and Mlodinow, with their book, The Grand Design, caused quite a stir when they wrote – “Pope John was killed by the effects of the law of gravity a few months later when the roof of his palace fell in on him“.

Bonus Death Fact: Jack Daniel, the founder of Jack Daniel’s Tennessee whiskey distillery, died in very peculiar manner:

Unable to open the safe in his office, Mr. Jack kicked it in frustration. This blow broke his toe and infection set in, leading to his untimely death in 1911. – [Source]

10 Fancy Units of Measurement

by Anupum Pant

There exist a few unusual units of measurement which you must have never heard of, or would have never thought of them as units until now. Here is a list of 10 of the many fancy units of measurement.

Note: These units are not official. They’re often used for their humor value or for simplicity’s sake):

1. Car length – It is not a very unusual unit of measurement and is used normally to mention the braking distance of a vehicle. Deriving its length from a typical car’s length, 4 meters is referred as one “car length”. You must have heard one spy advising another spy to keep a 2 car length distance from a vehicle to avoid detection.

2. Nanoacres – A measure of area which is equal to about 4 sq.mm (4.0468564224 sq.mm exactly). It is the area of a single VLSI chip which is square in shape and measures 2 mm on each side. This unit is widely popular as a joke among electronic engineers – who often are known to make quips about VLSI nanoacres having costs in the same range as real acres.

3. Grave – It is a unit that measures mass and equals 1 kilogram or 1000 grams. Grave was set to be the standard unit of mass for the metric system, but it was replaced by kilogram in 1799. [read more about it]

4. Moment – Moment is actually something that was used to measure 90 seconds during the Medieval times. But for modern times, the Hebrew calendar’s definition of moment makes more sense. According to it, a moment is equal to 5/114 of a second or around 0.0438  seconds. [read more]

5. Jiffy – Jiffy is used popularly as an informal time in English. Think of someone saying “I’ll be back in a jiffy”. But, we’ve never thought of it as a unit. Also, every field has a different definition of Jiffy.

  • Early usage – 33.35 picoseconds or the time take by light to travel 1 cm.
  • Electronics – 1/50th or 1/60th of a second, depending on the AC power supply frequency.
  • Computing – Typically anything between 1 millisecond to 10 millisecond. Commonly: 10 ms.
  • Animation – The time interval between each frame of a dot GIF file or 1/100th of a second or 10 ms.
  • Physics/Chemistry – Time taken by light to travel 1 Fermi or 3X10^-24 seconds.

6. Dog Year – Based on a popular myth that dog’s age can be calculated in human years by multiplying it with 7. So, a single Dog year comes to around 52 days (365/7 – Days in a human year divided by 7)

7. A Bible – Used as measure of digital data volumes. It is like measuring the size of a disk in number of movies it can fit which I used in this article. A single Bible in uncompressed 8-bits, has around 4.5 million characters and 150 of them can be stored in a single CD. Hence, a bible can be measured to be approximately equal to 4.67 Megabytes. Similarly,  Encyclopedia Britannica and Library of Congress are used to represent much larger data volumes.

8.  Kardashian – Yes, it is named after the 72 day marriage of  Kim Kardashian to Kris Humphries. Of course, it measures 72 days of marriage. So, a 25 year marriage would amount to around 126.7 Kardashians.

9. Wheaton – Used to measure the number of twitter followers relative to the popular celebrity Will Wheaton. This became a standard when he had 0.5 million Twitter followers. Today, Will Wheaton himself has 4.88 Wheatons. I, for instance, with 210 followers, have about 0.00042 Wheatons.

10. Warhol – Derived from the widely used expression coined by Andy Warhol – “15 minutes of fame” – 1 Warhol measures exactly what you’d expect it to – 15 minutes of fame. Yes, it measures the amount of fame.
Consequently, 1 kilowarhol is equal to 15,000 minutes of fame or 10.42 days and 1 megawarhol measures 15 million minutes of fame or about 28.5 years.

 

Deal with Poverty or Go to Mars?

by Anupum Pant

Indian Space Research Organization (ISRO) launched its Mars orbiter, Mangalyan (Translation: Mars Craft) on November 5th 2013 with a hope to become the 4th such organization in the world, to step into Mars exploration. I must say, it is quite a fete for a developing country which has to deal with a myriad of other socio-economic menaces. Besides that, this mission also placed India above every other Mars mission ever, in terms of the total cost involved. Frugal engineering, has helped ISRO to go to Mars with low costs – with a mere $73 Million dollar budget, MOM (Mars Orbiter Mission) has become the cheapest mission ever to Mars. [silly comparisions to put this into perspective]

Side note: India’s other pioneering low cost endeavors – World’s cheapest car; World’s cheapest tablet and cheapest house.

But, this successful launch came with a throng of detractors, ridiculing India for not using these $73 Million to deal with poverty (or “clean feces off its roads”). Clearly, they did not think it through before making such comments.

  1. A nation’s economy is a huge and complex thing. Things aren’t as simple as, stop space exploration funds and divert them to tackle poverty. A number of things run in parallel. Also, every nation has its own set of problems and they don’t stop spending billions of dollars for technological advancement to focus only on social or economic issues. And, I’m sure that the government India is also taking enough steps to tackle its national issues with a firm footing on advancement of technological avenues like space exploration.
  2. The main part of this article: In contrary to what is popularly believed, money spent on space exploration does not nebulously float out of earth (on the other hand, distributing this money among the poor would breed complacency among them and cause the money to literally float out). It plays a major role in creating new technologies, products, jobs and businesses. Let us take the example of NASA here:
    Space exploration has led to development of many things that you use daily. There wouldn’t have been any computers, wrist watches, Velcro, cell phones, GPS navigators etc, if funds were never allocated to the “wasteful” space research.  Without this, there is a chance that you wouldn’t have heard of solar energy, cryogenics or even robotics. Also, several improvements in health care, energy and the environment are a result of research done for space exploration. [10 NASA inventions you use everyday].
    When you think of all this, $73 Million seems like an extremely small number. Remember, that this is also helping other businesses (vendors etc) flourish, which in turn are creating jobs for the poor and spurring innovation.
  3. Thirdly, The Indian Space Research Organization is a unique organization which has managed to stay the world’s most profitable space organization and has sustained on a minuscule budget of about $1 Billion. It relies on the Indian low-cost mantra to develop innovative technologies. As a result, this intelligent government venture has helped to create a profitable environment for space research. Hence, it isn’t a “wasteful” allocation of funds. Additionally, with its engineers living off a small salary ($20,000) as compared to American engineers ($100,000), we can definitely place our trust on an organization like ISRO – Like previous missions, they’ll make much more than $23 Million from this mission too. In other words, they’ll bring money in, not let it float out (better option for dealing with poverty, than just distributing it among the poor).

That said, 21 out of 51 missions to Mars have failed and it means that there is still a long way for this absurdly low-cost Indian mission [also a risky one] to be a completely successful one. So far, it is doing pretty good. We can only wait and see, what the end will be like.

The Standard World Map is Misleading

by Anupum Pant

Mercator’s projection

Most of us have this image of the world in our minds. This kind of a map, today printed in almost every textbook, known as the Mercator’s projection was first created to make work easy for navigators. Even Google Maps uses a Mercator-derived technique to project the world on a flat surface. But, Mercator’s projection has only deceived our idea of geographical area for all these years. For instance, it has led us into believing that Greenland covers an area which is almost equal to Africa (Also, have a look at the size of Antarctica there. Gosh!). The comparison of these two land masses actually looks like this.

According to this infographic, the actual size of Africa is larger than US, China, India, Mexico, Peru, France, Spain, Papua New Guinea, Sweden, Japan, Germany, Norway, Italy, New Zealand, the UK, Nepal, Bangladesh and Greece, all of them put together. In short, Africa is around 14 times larger than Greenland. Do not underestimate its area.

You can try playing with various combinations on this web app – map fight. Try these: Australia vs. Antarctica; US (contiguous) vs. Russia; and of course Greenland vs. Africa; they’ll leave you spellbound.

Why does this happen?

Since our planet is a sphere (an oblate ellipsoid really), to project it on a flat surface like paper, the actual shapes and sizes of landmasses have to be distorted to some extent. There is no way around it. Today, hundreds of different projection methods meant for various purposes are available, but none of them can exactly show the actual shapes & sizes of the landmasses. Some preserve the shape, some preserves the size, and others preserve direction…so on…

Mercator’s projection, the devious one discussed above, for example, uses a cylindrical projection. That means, it stretches the areas on a globe, which are nearer to the poles. Hence, the imprecise size of Greenland and Antarctica.

What is a perfect map, then?

Even after developing hundreds of projection method, we haven’t been able to spot the perfect method, nor will it happen in the future. But, to get the right sense of area, a projection method known as the Peters (also known as Gall-Peters projection) projection, is said to be the most accurate (in terms of area). It is also one of the most controversial maps.

Peter’s projection also has a huge fan following in spite of its terrible appearance.

Bonus Map Facts:

  1. National Geographic started using the, good looking, Robinson projection from the year 1988, and used it for ten years, then, it moved to the Winkel-Tripel in 1998.
  2. An ideal Mercator’s projection would have infinite height if it doesn’t truncate some area near the extreme poles.
  3. Peters pointed that the Mercator’s projection made developing countries seem much smaller than they actually are. He said that these errors made the struggles of developing nations near the equator looks much smaller to the developed world.
  4. XKCD published a comic on projections – “What your favorite map projection says about you.” 977. [see the explanation here]

Super-hydrophobic Surfaces are Unbelievable

by Anupum Pant

It is almost impossible to get a lotus leaf wet. If you try pouring water on it, you’ll see that it will form little beads of water and quickly roll out of the leaf. This happens because a lotus leaf is super-hydrophobic. Although, even your raincoat doesn’t get wet, it isn’t super-hydrophobic. Water sticks to on the surface of a raincoat. Super-hydrophobic surfaces don’t let water stick on it. But how do they manage to do that?

The science – Contact angle

Every time a liquid sits on the surface of a solid, the liquid drop forms an angle of contact as shown below. Things that don’t get wet have a contact angle greater than 90 degrees and the ones that get wet form an angle lesser than 90 degrees. The greatest angle is always less than 180 degrees. Theoretically, a perfect bead will form at that angle.

Super-hydrophobic surfaces are able to push this angle to as high as 175 degrees to form almost a perfectly spherical water droplet on the surface (due to very high surface energy). This ensures that as soon as water falls on it, it rolls away. The surface never gets wet.

Advantages

Imagine things never getting wet. How about a completely water resistant phone, a shoe that never gets dirty, shirts that repel ice-cream and wind-screens rolling away rain droplets like magic? All these things are possible, if they can be converted into super-hydrophobic surfaces. [They can be. Watch the video below]

Besides repelling water, these surfaces can also prevent formation of ice, resist corrosion and prevent bacteria from sticking to it. The possibilities are endless.

How to do it artificially?

Today, we have managed to develop several artificial methods to make almost any surface super-hydrophobic. Commercial services like NeverWet, HydroBead and Lotus leaf coatings are making a roar in the market by offering amazing promises. Normally, they use simplified spray coatings to convert normal surfaces to super-hydrophobic surfaces, so any one can use them, anywhere.

Things You Should Know About Farts

by Anupum Pant

Flatulence, an expulsion of intestinal gas, commonly known as fart, is something no one likes to talk about because it is considered a taboo, almost everywhere in the world. To top it all, some might even sideline this article by tagging it as a vulgar one. In my defense, that is exactly the purpose of my blog – To talk about things no one will talk to you at school (or anywhere else). Our inclination here is to learn.

Avoid shaming others for it.
Firstly, it is important to know that, irrespective or gender, race or nationality, farting is an invariable result of digestion and everyone does it about ten times a day. Even dead people fart. So, by shaming someone for letting it out in an accidentally loud way, is hypocritical on your part; it [shaming others] can be avoided. As Eric Auld says, it is okay to fart.

Do not hold it.
Secondly, it is not okay to hold flatulence to avoid embarrassment. Doing this, has the potential to cause a life threatening condition called diverticulitis. This disease is prevalent among the urban people for obvious reasons. Urban people have a greater societal pressure to hold it, than a free-living farmer. To give you an idea, 30 million Americans are currently suffering from it (old data).

What is it?

Principally, it is a mixture of gases taken in through mouth with food and gases which are produced while digesting food. The composition of ‘gas’ varies with, people, the kind of bacteria in their stomach and the kinds of food they eat. Oftentimes, people don’t hate their own smell; at the same time, detest the gases coming out from others. A fart is comprised of gases like Hydrogen, Nitrogen, Carbon dioxide, Oxygen and Methane. It smells bad due to the presence of Hydrogen Sulfide, Mercaptans and Ammonia. And the presence of inflammable gases like Hydrogen and Methane makes them inflammable.

Farts in a humid environment can seem worse because during such conditions, our sense of smell is enhanced. This is the reason why farts smell worse in a shower.

Minimizing the effect

Although, there is no way you can end this trouble from your life, you can adjust your diet a bit to prevent this from happening in excess. Beans, cauliflower, corn, eggs etc are some foods which are notorious for producing gas in your body. These foods release a relatively greater amount of gas than other foods while getting digested in the intestines. Cutting their intake can help (of course consult your doctor first).

Another way to lower the problem is to prevent the odor from troubling others. This can be done by using products like “odor-proof undies”.

Coughing or suddenly moving your chair could help you to mask the sound.

 

A Bat’s Inverted Sleep Position

by Anupum Pant

I have written about sloths in the past. In that post, we appreciated the way their bodies are engineered to stay inverted for most of their lives. It turns out, a bat’s body is designed (rather evolved) in a similar way, which enables them to relax and sleep upside down. In this post, I would like to discuss – why did they evolve this way and how do they do it?

If you are interested to know more about bats, you will definitely like this post from the archives. [Bats can See]

How can bats manage to sleep like this?

Humans sleep in a horizontal position, cows sleep with their eyes open, horses sleep in a standing position, and of course, bats sleep in an inverted position. What makes an animal sleep in the position they do, is basically their anatomy – the way their bodies are designed. While sleeping upside down might seem as an anomalous behavior to us, it is a normal position for the bat’s body. Like we don’t exert energy when we are lying down, bats’ bodies don’t consume extra energy for hanging down like that.

Firstly, a bat’s claw is like a hook. A better way to understand why this helps is, to look at a converse behavior – the way a human hand works. We use up energy to contract tens of muscles and make up a hook with our fingers; this is not a normal state of our hand. Also, our relaxed hands are open where we don’t exert any energy and we sleep with our hands in that position. A bat’s claws are designed in a completely inverse fashion; they are hooked in the normal position. They don’t take up energy to make them into hooks, they are like that. And they sleep like that – which enables them to hang without using energy.
So, unlike our hands, a bats’ closed fist is their relaxed position. They have to contract tendons and use energy to open them up. This anomalous talon design allows them to hang in a relaxed position.

Bat's Talons - Normal position

Secondly, unlike every other bird, a bat can’t take off from an upright position, or from the ground. They have to be inverted to start flying. This is because they have relatively weaker wings which can’t make them fly from a stationary position. Think of an X-51A Waverider, which has to be carried on a B-52 plane and dropped down to start a flight. They drop down for a very small amount of time and beat their wings vigorously to start a flight. Since, they have to wake up inverted to go flying and catch a meal, they go to sleep like that.

Why did they evolve this way?

They’ve evolved this way to simply stay away from the predators:

  1. By hiding up in a place where not many predators would look – under a bridge, roof of the cave and dark tree canopies. Also, at places like these, they don’t have to compete with other birds for a place.
  2. And by escaping quickly in case of an attack by attaining instant flight [see above].

That Sweet Scent of Rain

by Anupum Pant

When rain starts falling after a long dry spell, most of us notice a sweet-musky scent around us. Sometimes, it is as if you can smell the rain coming. Have you ever wondered what causes this peculiar smell?

Well, scientists have also wondered the same for a long time and now they have some concrete answers for us. According to them, this evocative scent is a mixture of several individual smells. In essence, there are three factors which combine to form the “petrichor” – The smell of rain.

  1. Bacteria – The best (my favorite) of all the three is caused because of a specific type of bacteria in mud called Actinomycetes. The force, with which the rain water falls, disrupts the bacteria-produced-spores in dry mud, and the moisture present in the air carries them to our noses. Most people love this odor and associate it with rain.
    So, spores of bacteria are responsible for the kind of smell you get, when rain falls on dry mud.
  2. Plant Oils – A blend of oils produced by plants during the dry spell is another main source of this aroma. When it rains, volatile parts of these oils get released into the air. It is the kind of smell you get when you are getting wet in the woods.
  3. Ozone – Another smell associated with the rain, is a minor part of petrichor and it smells like burning wires. This is produced by a reaction caused when lightning strikes, the Nitrogen and Oxygen present in air to form Ozone molecules.

Subjective senses

Besides that, smell is a subjective sensation. That means, you can’t explain a smell to someone, and you can never know what the other person smells. So, it becomes really hard for scientists to communicate to us, which scent is which.

Some of us like the bacteria smell, while others might like the third component of petrichor.

Some like the smell of rain, others don’t. But we’ll never know accurately, if the scent you adore is the same as the one your friend hates. One way to communicate some information about these scents is by comparing them with other popular smells (like I did above). This could probably give you a vague idea, but the exact sensation will remain elusive. It is like trying to explain the color red to a person who’s been blind all his/her life.

Bats Can See

by Anupum Pant

While every teacher around the world is busy teaching their kids that bats are blind, the contrary is actually true. Bats aren’t really blind and they can see pretty darn well even in low light. In fact, their eyes work better than our eyes do in a dimly lit environment (eg. Moon light).

None of the bats’ 1100 species are completely blind. Although, there are a few which depend heavily on a technique called echolocation to navigate around objects which are near, they still have to use eyes to see objects which are far away. Additionally, most bats like to hunt in complete darkness (to avoid competition from other birds), so they use echolocation during such times [because eyes need at least some amount of light to be present]. The daylight hours spent by them to groom or sleep don’t demand much of their visual skills, but that doesn’t make them blind.

One way in which bat’s vision is poorer than our visual ability, is that they can’t see colors like we do. Everything they see is in black and white. This disability, if you may call it one, is compensated by their ability to detect light waves whose frequencies lie beyond the human visible spectrum. Flying foxes, however, which are actually bigger bats, can see colors.

So, simply put, bats can see, but they don’t have to use their eyes to hunt or move around. This makes your teacher wrong when he/she says chides you with the phrase – “Blind as a bat”

Bonus Bat Facts

  1. Bats don’t carry rabies. However, like humans, the disease affects some bats.
  2. Apart from vampire bats found in Mexico, Central America and South America, no other bats suck blood.
  3. Bats hunt insects above your head, they aren’t interested in your hair or your eyes.
  4. Bats can catch insects with their tail or wing membranes.
  5. Fruit bats are also known as flying foxes, they eat fruits.
  6. Bats collectively eat tonnes of insects and protect our crops.
  7. Some bats eat fish and frogs.
  8. Bats’ dung, is rich in nutrients. It is mined from caves, bagged, and used by farmers to fertilize their crops.

Echolocation: A bat echolocates by sending out streams of high-pitched sounds through its mouth or nose. These signals then bounce off nearby objects and send back echoes. By “reading” these echoes with its super-sensitive ears, the bat can determine the location, distance, size, texture and shape of an object in its environment. In some cases, a bat can even use echoes to tell insects that are edible apart from those that aren’t. – [Source]

 

Horror Movies are Good for You

by Anupum Pant

It is Halloween today and most of us must be busy making plans for the day. But if you’ve missed including a horror movie in your plans, after reading this post, you might want to consider putting it in the list.

Studies have shown that watching a horror movie can actually be beneficial to your health. In two separate experiments, scientists were able to record two different ways in which horror movies can be good for you. Of course, this shouldn’t encourage extremely sensitive people to force horror movies onto themselves. In spite of these proven benefits, pregnant women, old men, little kids and people with heart disorders must try to stay away.

Moreover, the benefits found, were not practically too big. So, if you are thinking of leaving your healthy diet plan and making up for it by starting to watch more horror movies, you are mistaken. But, scientifically, the discovery of such co-relations are considered as noteworthy.

The first study (increase in immunity)

Researchers suggest that while people watch horror movies, their brain secretes chemicals like dopamine, glutamate and serotonin. As a result, there is an increased brain activity, which makes the mind alert for a while. Additionally, threat signals that pass through the brain stimulate adrenal glands to produce adrenaline, which has an anesthesia like effect.

Secondly, a half-hour watch was found enough to boost the number of active white blood cells in their blood – they are responsible to keep diseases away. In the test, a first time watch of Texas Chainsaw Massacre by 32 men and women led to an increased immunity for some time. [Source Paper]

The second study (burns calories)

In another study conducted recently, scientists observed an average of 184 burnt calories among the people who watched The Shining (the 1980 thriller). Jaws took the second spot, with people burning on an average of 161 calories after watching it, and The Exorcist came third, with 158 calories. Top 5 calorie burning movies were as follows:

1. The Shining: 184 calories
2. Jaws: 161 calories
3. The Exorcist: 158 calories
4. Alien: 152 calories
5. Saw: 133 calories

Increased heart rate, muscular contractions, a surge in adrenalin, oxygen intake and greater carbon-dioxide output were the main reasons that  these extra calories got burnt. So, the next time you are watching a horror movie (working out), avoid popping popcorn. [Read more]

The Sun’s Unusual Behavior – Seen from Mercury

by Anupum Pant

The sun – as seen from Earth

For most of us living on Earth (closer to the equator), the sun has followed a simple path throughout the years. It rises, goes up at noon and then sets for rest of the day. It is a simple straight line for the complete year.
For people living a little away from the equator, things get a bit interesting. There, the summer sun at noon is overhead, but the winter sun is low at noon, not overhead. It isn’t very easy for a person living near the equator to grasp this phenomenon well. You’ll have to go there and see for yourself. Or simply, the simulator at the end of this paragraph will help you understand it better.
At poles, the sun almost moves horizontally for many days. It keeps on making a horizontal circle around you. There, it is day for 6 months and night for the next 6 months. [Here is a sun path simulator for Earth]

However, nowhere on earth, things get as interesting as they get in the skies of Mercury.

The sun – as seen from Mercury

On Mercury, the sun appears to briefly reverse its usual east to west motion once every Mercurian year. The effect is visible from any place on Mercury, but there are certain places on its surface, where an observer would be able to see the Sun rise about halfway, reverse and set, and then rise again, all within the same day. It is indeed an unusual performance which isn’t easy for us Earthlings to digest. [See animation in the next paragraph]

Why does it happen?

Let us consider a simpler analogy – some planets (like Mars), as seen from earth, take a similar path. [see the animation for Mars’s path as seen from earth]

The planets, including Earth, all travel around the Sun in a continuous orbit. We can see them make their way across the sky in a straight line usually. However, every now and then a planet appears to turn around. After turning around, it appears to move back the way it came. This is called a retrograde orbit and is caused due to the difference in speeds at which the planets circle the Sun.

So, as we see Mars do a reverse from earth, a similar motion of sun is observed from the surface of Mercury.

[Apparent Retrograde Motion – Wikipedia]

Why is a Metal Plate “Colder” Than a Plastic Plate?

by Anupum Pant

No, it isn’t!

What is Cold?

According to the dictionary, a body at a relatively lower temperature, especially when it is compared to the temperature of a human body is described as a colder one. So, any object below the normal human body temperature – about 37 degrees Celsius – is a cold thing. But wait a minute!

When you touch an object, what does it tell you about the temperature of the object? Can you really judge if it is a cold one or a hot one? Unfortunately, our bodies aren’t thermometers, we are not so smart when it comes to judging the temperature. Consider the following case.

A book and a steel plate kept in the same environment for a long time attain the same temperature eventually (it is called thermal equilibrium). This can be checked by using a thermometer on both the objects. But, when people are asked to touch a metal plate and a book, they find the former to be much cooler. You can try this out yourself by touching different materials around you. You’ll see how some things ‘feel colder’ while the others feel warmer. A YouTube channel Vertasium conducted a social experiment to record this on camera. See the video below:

There is no cold – only heat

So, in the video, ice melts faster, if kept on steel plate than on a plastic plate, even when the steel plate ‘feels colder’. Common sense dictates that the colder thing is supposed to sustain the ice block for a longer time, just like your refrigerator does. So why does the opposite happen?

A better way to understand this ‘contradiction’ (not really a contradiction) can be this:

According to thermodynamics, simply put, everything has heat in it. So, even a cold ice block has some amount of heat stored in it (say, around 273.15 Kelvin or 0 degree Celsius). When one object comes in contact with other object, it loses or gains heat till their temperatures get equal or till they attain ‘thermal equilibrium’. Which object loses heat and which one gains it, is decided by their relative temperatures. In case of ice and steel, ice has a lower temperature than steel (assuming it isn’t already freezing out there). Therefore, here, ice gains heat from steel till they attain the same temperature and ice melts.

Side note: The ice is also in contact with a relatively ‘hotter’ atmosphere. Hence, it gains heat from there also. In this case, we are only concerned about the steel and ice interaction.

Why does it melt faster on steel?

There is a particular property which depends on the kind of material and is called thermal conductivity. This is the parameter which decides which objects lose heat quicker and which ones do it slower.

Here, for instance, steel has a higher thermal conductivity than plastic. Hence, the steel plate gives away heat to the ice block faster than a plastic block does. As a result, ice melts faster on a steel plate than on a plastic one.

Incidentally, this effect can also be used to explain why one plate feels colder than the other, in our hands. Think of it like this, the ice is replaced by our hand. So, a steel plate, due to its better thermal conductivity, draws heat faster from our hand than a plastic plate. This makes us feel that the steel plate is colder than the plastic one.

As checked by a thermometer, both the plates have the same temperature, our bodies are only fooled into believing that the thing we feel is temperature; it isn’t. None of the plates is actually colder than the other (according to the dictionary – see first paragraph). We don’t feel the temperature. What we feel is actually the rate of heat being drawn away from our hand. Faster an object draws heat, the colder it feels.

Understanding the Impending Helium Crisis

by Anupum Pant

There is too much Helium?

Helium is the second most abundant element in the observable universe, present at about 24% of the total elemental mass. Helium is also the second lightest element. So, 24% by mass is too huge a mass for a single light element. It equates to a measure that is probably millions of times more than what humanity could use up in millions of years. Close to about 12 times the mass of all the heavier elements combined, this element will almost never run out. But, that is only when we talk about the universe. Back in Earth, it is completely a different story.

Helium sources for us

On Earth, Helium is relatively rare. It amounts to only a 0.00052% volume of the earth’s atmosphere. Although 0.00052% is not too less, you also can’t consider it as an abundant element. Moreover, extracting Helium from air is almost 10,000 times more costly than fractional distillation (mentioned in the next paragraph). So, all that Helium in air is nearly useless to us till better methods of extraction are invented.
Thankfully, Helium is also present under the surface of the earth. The source of this kind of deposit is, radioactive decays which take place down there. It mixes with the natural gas and is lost to space, if released into the atmosphere. It is separated from natural gas using a process called fractional distillation – The best process to make Helium.

The largest known underground reserve estimated to contain about 10 billion cubic feet of Helium is a federal reserve (mostly under Texas and Kansas). For years US reserves had been the largest global suppliers of Helium (90%). Even today, these reserves contribute to more than 35% of the total global supply. The price of Helium coming from this source has remained almost unchanged for a long time. While during the same period (10 years) privately held Helium prices have tripled. The gap in prices is increasing every day, creating a big distortion in the market.

Helium Usage

Uses of Helium range from manufacturing smart phone screens (all LCD screens) to optical fibers (Internet cables) to health care (MRI scanners) to scientific research etc. [Uses of Helium]

The Problem

Since Helium has been made artificially cheap due to the Helium privatization act, it is popularly believed to be a cheap gas and is wasted a lot. Instead of using it up for important things, we consume it by filling up party balloons, distort voices and other entertaining activities. In fact, the warning issued by the Nobel Prize winner Robert Richardson that Helium could be depleted within a generation, seems to have had no effect on us. We still continue to waste a lot of Helium, release it into the air and keep losing it forever. Not many realize that it is a non-renewable resource.

We have almost reached a crisis already, but it was temporarily averted by the congress. In the future, after about 6-7 years, when the Federal Reserve stops supplying it (at below-market prices), it could be a big problem. I’m not very optimistic about market adjusting within such a small span either. In under a decade, we’ll probably see smart-phone prices, optical fiber prices and health care (MRI scans etc.) prices shoot up precipitously due to this artificial market distortion, if we do not start using Helium properly.